Setting The System To Factory Defaults - FLIR M3100E Series Instruction Manual

16 Using the Main Menu
To save your system configuration to a USB flash drive:
1. Insert a USB flash drive (not included) into one of the USB ports.
2. From the Main Menu, click
3. Under Device Name, select the USB device where you would like to save the
configuration.
4. Click Export to save your current system configuration.
To restore a saved system configuration:
1. Insert a USB flash drive (not included) with a saved system configuration into one of
the USB ports.
2. From the Main Menu, click
3. Under Device Name, select the USB device.
4. Click the folder with the configuration files you would like to restore. Configuration file
folders are labeled "Config" and then the time and date the configuration was saved (e.
g. Config_20140425103727).
5. Click Import to restore the system configuration.
6. Click OK to confirm. The system will restart to complete the operation.

16.3.21 Setting the System to Factory Defaults

The Default menu allows you to reset the system to factory default settings.
#LX400028; r.27370/27370; en-US
and then click Setting>Config Backup.
and then click Setting>Config Backup.
66