Setting The System To Factory Defaults - FLIR M31041 Instruction Manual

15 Using the Main Menu
4. Click EXPORT to save your current system configuration.
To restore a saved system configuration:
1. Insert a USB flash drive (not included) with a saved system configuration into one of
the USB ports.
2. From the Main Menu, click
3. Under Device Name, select the USB device.
4. Click the folder with the configuration files you would like to restore. Configuration file
folders are labeled "Config" and then the time and date the configuration was saved (e.
g. Config_20140425103727).
5. Click IMPORT to restore the system configuration.
6. Click OK to confirm. The system will restart to complete the operation.

15.3.21 Setting the System to Factory Defaults

The Default menu allows you to reset the system to factory default settings.
To reset the system to factory default settings:
1. From the Main Menu, click
2. Check the menus you would like to reset to default settings.
3. Click OK.
#LX400028; r. 2.0/23335/23335; en-US
and then click Setting>Config Backup.
and then click Setting>Default.
63