Configuring Hard Drive Type; Configuring General System Settings - FLIR Lorex DV700FS Series Instruction Manual

14 Using the Main Menu
3. Click OK to save changes. The system will restart to complete the formatting process.

14.3.17 Configuring Hard Drive Type

The system supports the following hard drive types:
• Read-write HDD: Normal recording hard drive.
• Read-only HDD: The system can playback data from this hard drive, but it will not re-
cord to it.
To set the hard drive type:
1. From the Main Menu, click
2. Click the hard drive you would like to configure.
3. Under Type, select Read-write HDD or Read-only HDD.
4. Click OK to save changes. The system will restart to complete this operation.

14.3.18 Configuring General System Settings

You can use the General menu to configure miscellaneous system settings.
To configure general settings:
1. From the Main Menu, click
#LX400060; r.37992/37992; en-US
and then click Storage>HDD Manager.
and then click Setting>General>General.
69