IEI Technology PPC-51 A-H61 Series User Manual page 100

PPC-51xxA-H61 Panel PC
Disabled
Enabled
Device Mode [Normal]
The Device Mode option is used to set the Serial Port 5 signaling mode.
Normal
RS422/
RS485
Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto
IO=2D0h;
IRQ=10
IO=2C0h;
IRQ=10, 11
IO=2C8h;
IRQ=10, 11
IO=2D0h;
IRQ=10, 11
IO=2D8h;
IRQ=10, 11
IO=2E0h;
IRQ=10, 11
Disable the serial port
Enable the serial port
D
EFAULT
Sets the serial port mode to normal.
D
EFAULT
Enables serial port RS-422/485 support.
The serial port IO port address and interrupt address
D
EFAULT
are automatically detected.
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10, 11
Serial Port I/O port address is 2D8h and the interrupt
address is IRQ10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11
Page 87