ICP DAS USA I-7530A-MR-FD User Manual page 58

Hide thumbs Also See for I-7530A-MR-FD:

Table of Contents

 Response: A valid command will write the RS-232/485/422 configuration

parameters into the EEPROM and then reboot the I-7530A-MR-FD module.

Invalid command: ?<Error Code><CR>

 Note: It is necessary to enable the "Error Response" function while using

the UART2CAN Utility in order to receive Syntax and/or communication

error information.

 Example:

Command: P00B30000<CR>

Set the RS-232/485/422 baud rate=115.2 kbps, data bit=8, stop

bit=1, none parity, no checksum, no error responses and no

timestamp responses into the I-7530A-MR-FD module and then

reboot the I-7530A-MR-FD module.

I-7530A-MR-FD Modbus RTU to CAN Converter User's Manual (Version 1.0, 08/2022) ------------- 58

Table of Contents