ICP DAS USA I-7530A-MR-FD User Manual page 36

Hide thumbs Also See for I-7530A-MR-FD:

Table of Contents

Setting steps:

Figure 3-18 CAN filter setting interface

1. Choose to set Standard ID (11bit ID) or Extended ID (29bit ID)

2. Enter the range for the ID filter and press "Add"

3. After pressing "Add", the table below will display the entered ID

4. Finally, click Set to transfer the setting value to I-7530A-MR-FD

Note: The ID entered is a passable ID

Taking Figure 3-17 as an example, the IDs that can be passed are

004~015 and 07F

I-7530A-MR-FD Modbus RTU to CAN Converter User's Manual (Version 1.0, 08/2022) ------------- 36

Table of Contents