ICP DAS USA I-7530A-MR-FD Quick Start

Hide thumbs Also See for I-7530A-MR-FD:

Download this manual

Packing List

In addition to this guide, the package includes the following items:

I-7530A-MR-FD

Technical Support

service@icpdas.com

www.icpdas.com

 For Desktop Web

I-7530A-MR-FD Quick Start

RS-232 cable

(CA-0910)

Resources

How to search for drivers, manuals and

spec information on ICP DAS website.

 For Mobile Web

I-7530A-MR-FD

v1.0, October 2020

Screw Driver

Quick Start

Need help?

Do you have a question about the I-7530A-MR-FD and is the answer not in the manual?

Page 1 I-7530A-MR-FD Quick Start v1.0, October 2020 Packing List In addition to this guide, the package includes the following items: I-7530A-MR-FD RS-232 cable Screw Driver Quick Start (CA-0910) Resources How to search for drivers, manuals and Technical Support spec information on ICP DAS website.
Page 2 Appearance Number Description COM PORT CAN PORT LED indicators 2. LED indicators I-7530A-MR-FD LED Status Status Name Firmware Updating All LED always Mode turned on PWR LED always Module be turned on and Configuration Mode the other LEDs blink every 1000 ms...
Page 3 3.Pin assignments Description Not Connect CAN Low CAN Ground Not Connect CAN Ground CAN High Not Connect Description RS-485 DATA+ RS-485 DATA- No use RS-422 TxD+ RS-422 TxD- RS-422 RxD+ RS-422 RxD- No use RS-232 RXD RS-232 TXD RS-232 GND No use +Vs(+10 ~ +30 VDC)
Page 4 The I-7530A-MR-FD module provides jumpers to select whether to enable the termination resistor. If the user needs to enable the termination resistor, please open the cover of the I-7530A-MR-FD module, and you will see the location of JP3 as shown in the diagram below:...