Icom IC-M605E Instruction Manual page 52

8
DSC OPERATION
■ Sending a Non-Distress call (Continued)
D Sending a Position Request call/Polling Request call (For only the USA version)
• Send a Position Request call when
you want to know a specific ship's
current position, and so on.
• Send a Polling Request call when you
want to know if a specific vessel is in
the communication area, or not.
Example: Sending a Position Request
call
1. Push [Compose Other]
display the COMPOSE NON-
DISTRESS screen.
L To display the screen from the Menu
screen:
([MENU] > Compose Non-Distress)
2. Select "Message Type," then push
[ENT].
3. Select the call to send, then push
[ENT].
42
4. Select "Address," then push [ENT].
5. Select an Individual address, or
"Manual Input."
(Example: STATION1)
to
When you select "Manual Input" in step
5, push the keypad to manually enter
the Individual ID that you want to call.
Rotate
+
Push
6. Push [Call]
Rotate
+
Push
7. After sending, the following screen
is displayed.
L See page 29 or page 30 for
details of the Task mode's software
key functions.
to send the call.
Push