Icom IC-M605E Instruction Manual page 48

8
DSC OPERATION
■ Sending a Non-Distress call (Continued)
When you select a coast station
in step 3, the voice channel is
automatically specified by the coast
station. Therefore, skip steps 4 and 5,
and go to step 6.
4. Select "Channel," then push [ENT].
5. Select the voice channel,
then push [ENT].
6. Push [Call]
Individual call.
38
7. After sending, the following screen
is displayed.
L See page 29 or page 30 for
Rotate
8. When the acknowledgement is
+
received:
Push
• Alarm sounds.
• The following screen is displayed.
to send the
9. Push any [Alarm Off]
Push
details of the Task mode's Software
key functions.
(Example: ACK (Able))
.
10. Push any [Close Call RCVD
Window] .
When you receive "ACK (Unable)" in
step 8, skip step 11, and go to step 12.
11. Hold down [PTT] to communicate.
12. Push [Standby] to return to
the Main screen.
NOTE:
After receiving the acknowledgement:
• The voice channel specified in step 5 is
selected.
• A different voice channel is selected if the
station you called cannot use the channel.