Sending A Distress Call - Icom IC-M605E Instruction Manual

Vhf marine transceivers
Table of Contents

Advertisement

■ Sending a Distress call

NEVER MAKE A DISTRESS CALL IF
YOUR SHIP OR A PERSON IS NOT
IN AN EMERGENCY.
A DISTRESS CALL SHOULD BE
MADE ONLY WHEN IMMEDIATE
HELP IS NEEDED.
You should send a Distress call if, in
the opinion of the Master, the ship or
a person is in distress and requires
immediate assistance.
L Emergency channel (Channel 70) is
automatically selected to send a Distress call.
Other ship
About 20 to 30 miles
(Sea area A1)
Distress Alert
Transmission
Ship in Distress
See NOTE on page 33 for a
Distress call.
TIP: If you want to compose a Distress
call, see ʻRegular call.ʼ (p. 32)
D Simple call
1.
Confirm no Distress call is being
received.
2. Lift up the key cover, then
hold down [DISTRESS] until
"Transmitting" is displayed to send
the Distress call.
• While holding down [DISTRESS],
count down beeps sound and both
the key and display backlighting blink.
Coast
Station
3. After sending, the following screen
4.
5. Push any [Alarm Off]
6. Push any [Close Call RCVD
7.
8. Push [Standby]
DSC OPERATION
is displayed.
• Channel 16 is automatically selected.
When receiving the
acknowledgement:
• Alarm sounds.
• The following screen is displayed.
.
Window]
.
Hold down [PTT] to announce your
situation.
to return to
the Main screen.
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IC-M605E and is the answer not in the manual?

This manual is also suitable for:

Ic-m605euroIc-m605

Table of Contents