Icom IC-M605E Instruction Manual page 61

D Receiving an Individual call
NOTE: When the "Individual
ACK" item is set to "Auto," the
transceiver automatically sends an
acknowledgement. Both the TX and RX
calls are stored in the Transmitted and
Received Call Logs. (pp. 58, 59)
1. W hen an Individual call is received:
• Alarm sounds.
• T he following screen is displayed
and the backlight blinks.
• " " blinks.
2. Push any [Alarm Off]
3. S elect your action.
[Ignore]*: I gnores the Call and
returns to the Main screen.
* D isplayed only when
"Single" is selected in the
PROCEDURE menu.
(p. 64)
[Hold]: H olds the RX call task,
and returns to the Main
screen.
[ Able]: S ends an acknowledgment
without any changes.
[Accept]: E nters the DSC Task
mode.
.
DSC Task mode (pp. 29, 30)
• Rotate [CH/ENT] to view the call
contents.
DSC OPERATION
When you select [Accept]
3, you can send an acknowledgement
in the DSC Task mode. To send the
acknowledgement, go to step 4.
If you return to the Main screen
without sending the acknowledgement,
go to step 7.
4. P ush the key to select an
acknowledgement option.
5. Push [Call] to send the
Individual acknowledgement.
6. D epending on the option selected
in step 5, hold down [PTT] to
communicate.
7. P ush [Standby]
to return to
the Main screen.
TIP: When you send the
acknowledgement, select one of three
options, depending on your situation.
See page 39 for details of the
Individual acknowledgement
procedures.
8
1
2
in step
3
4
5
6
7
8
9
10
11
12
13
14
15
16
51