Icom IC-M605E Instruction Manual page 66

8
DSC OPERATION
■ Receiving DSC calls (Continued)
D Receiving a Position
Request call
NOTE: When "Position ACK" is set to
"Auto," the transceiver automatically
replies to the call. Both the TX and RX
calls are stored in the Transmitted and
Received Call Logs. (Default: Manual)
1. W hen a Position Request call is
received:
• Alarm sounds.
• T he following screen is displayed
and the backlight blinks.
2. Push any [Alarm Off]
3. S elect your action.
56
[Ignore]*:
I gnores the Call and returns to the
Main screen.
* D isplayed only when "Single" is selected
in the PROCEDURE menu. (p. 64)
[ Hold]:
H olds the RX call task, and returns
to the Main screen.
[ ACK (Unable)]:
S ends an acknowledgment with no
position and time data.
[ ACK (Able)]:
S ends an acknowledgment with
position and time data.
[ Accept]:
E nters the DSC Task mode.
.
DSC Task mode (pp. 29, 30)
• R otate [CH/ENT] to view the call contents.
4. P ush [Standby]
the Main screen.
TIP: See page 43 for details of
sending an acknowledgement.
D Receiving a Test call
/Polling Request call*
*For only the USA version.
NOTE: When "Test ACK" or "Polling
ACK" is set to "Auto," the transceiver
automatically replies to the call. Both
the TX and RX calls are stored in the
Transmitted and Received Call Logs.
Example: R eceiving a Test call
1. When a call is received:
• Alarm sounds.
• T he following screen is displayed
and the backlight blinks.
• "
" blinks.
2. P ush any [Alarm Off]
3. Select your action.
to return to
.