Icom IC-M605E Instruction Manual page 64

8
DSC OPERATION
■ Receiving DSC calls (Continued)
3. P ush any [Close Call RCVD
Window] .
• Enter the DSC Task mode
DSC Task mode (pp. 29, 30)
• A utomatically selects the channel that
is proposed by the called station for
voice communication.
• Rotate [CH/ENT] to view the call
contents.
4. H old down [PTT] to communicate.
5. P ush [Standby]
the Main screen.
54
D Receiving an All Ships call
1. W hen an All Ships call is received:
• Alarm sounds.
• T he following screen is displayed
and the backlight blinks.
• " " blinks.
2. Push any [Alarm Off]
3. S elect your action.
[Ignore]*: I gnores the Call and
to return to
[Hold]:
.
returns to the Main screen.
* D isplayed only when
"Single" is selected in the
PROCEDURE menu.
(p. 64)
H olds the RX call task,
and returns to the Main
screen.
[Pause]: P ush [Pause]
pause the countdown.
• T o restart the countdown,
push [Resume]
[Accept]: P ush [Accept]
enter the DSC Task mode.
DSC Task mode (pp. 29, 30)
• M onitor the channel specified by the
calling station for an announcement
from the calling station.
(Example: Channel 16)
• Rotate [CH/ENT] to view the call
contents.
4. P ush [Standby] to return to
the Main screen.
to
.
to