Setting The Call Channel; Receiving And Transmitting - Icom IC-M510 Instruction Manual

13
TRIAL MODE - Click here for more information
4
BASIC OPERATIONS

■ Setting the Call channel

By default, a Call channel is set in each Channel Group.
You can set your most often-used channel as your Call channel in each Channel Group
for quick recall.
1. Open the "Call Channel" screen.
2.
channel.
3.
as the Call channel.
4.

■ Receiving and transmitting

CAUTION: DO NOT transmit without an antenna.
1.
•
is displayed while receiving a signal.
2.
• is displayed while transmitting.
3.
P W R
TIP: To maximize the readability of your transmitted signal, pause for a second after
mouth, and then speak at your normal voice level.
NOTE: The Time-out Timer function cuts OFF transmission after 5 minutes of
continuously transmitting, to prevent prolonged transmission.
Call Channel
Hold down to
transmit.
Release to
receive.
Select a channel
Speak to the
Microphone.