Icom IC-M605E Instruction Manual page 53

8. When the Reply call is received:
• Alarm sounds.
• The following screen is displayed.
9. Push any [Alarm Off]
10. Push any [Close Call RCVD
Window] .
• The call contents screen is displayed.
L Rotate [CH/ENT] to view the call
contents.
11. Push [Standby] to return to
the Main screen.
D Sending a Position Request acknowledgement
When a Position Request call
is received, you can send an
acknowledgement.
1. When a Position Request call is
received:
• Alarm sounds.
• The following screen is displayed.
.
2. Push any [Alarm Off]
3. Push [Accept]
• Enters the DSC Task mode.
4. Select your action.
[ACK (Able)]:
Sends an acknowledgment with
position and time data.
[ACK (Unable)]:
Sends an acknowledgment with no
position and time data.
L The call contents screen is displayed.
L Rotate [CH/ENT] to view the call
.
contents.
.
• Change your position data, if the
displayed data is invalid. (p. 27)
5. Push [Call]
acknowledgement.
• When [ACK (Able)] is selected in step
5, your position and time data are
transmitted.
6. Push [Standby]
the Main screen.
TIP: When "Position ACK" is set to
Auto, the transceiver automatically
sends the acknowledgement. (p. 60)
8
DSC OPERATION
to send the
to return to
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
43