Icom IC-M605E Instruction Manual page 59

[Ignore]*: I gnores the Call and
returns to the Main screen.
* D isplayed only when
"Single" is selected in the
PROCEDURE menu.
(p. 64)
[Hold]: H olds the RX call task, and
returns to the Main screen.
[Pause]: Pauses the countdown.
• T o restart the countdown,
push [Resume]
[Accept]: E nters the DSC Task
mode.
DSC Task mode (pp. 29, 30)
• A utomatically selects Channel 16, and
then you should monitor it, because a
coast station may require assistance.
• Rotate [CH/ENT] to view the call
contents.
4. P ush [Standby] to return to
the Main screen.
D Receiving a Distress Relay call
1. W hen a Distress Relay call is
received:
• Alarm sounds.
• T he following screen is displayed
and the backlight blinks.
• " " blinks.
.
2. Push any [Alarm Off]
3. S elect the action.
[Ignore]*: I gnores the Call and
returns to the Main screen.
* D isplayed only when
"Single" is selected in the
PROCEDURE menu.
(p. 64)
DSC OPERATION
[Hold]: H olds the RX call task, and
returns to the Main screen.
[Pause]: P auses the countdown.
• T o restart the countdown,
push [Resume]
[Accept]: E nters the DSC Task
mode.
To send the
acknowledgement, push
[Accept]
.
DSC Task mode (pp. 29, 30)
• A utomatically selects Channel 16,
and then monitor it, because a coast
station may require assistance.
• Rotate [CH/ENT] to view the call
contents.
4. P ush [Standby]
the Main screen.
TIP: See page 36 for details of
sending acknowledgement.
8
1
2
3
4
5
.
6
7
8
.
9
10
11
12
13
14
15
16
to return to
49