Printing From Autocad - Canon iPF780 User Manual

iPF780
8
After confirming that
Line Drawing ) in the
• You can check the settings values selected in the
Note
9
Make your selection in the
10
Access the Page Setup pane.
11
Select and click a roll paper in the
12
Select the paper width of the roll loaded in the printer for
selected.
13
Specify additional printing conditions.
For details on available printing conditions, see "Printer Driver Settings ."
14
Confirm the print settings, and then click
• For tips on confirming print settings, see "Confirming Print Settings ."
Note • You can conserve roll paper by configuring settings suitable for the document.
For details on how to conserve paper and print, see "Conserving Roll Paper by Rotating Originals 90 De-
grees ."

Printing from AutoCAD

Printing from AutoCAD

Printer Driver Optimization Module for AutoCAD is software for printing optimally from AutoCAD with the printer driver.
By optimally controlling the processing resolution of raster data and the memory to be used in image processing of
AutoCAD, printing superior in reliability and productivity is realized.
If you install Printer Driver Optimization Module for AutoCAD on a computer on which supported AutoCAD is installed,
it will be installed automatically.
• Printer Driver Optimization Module for AutoCAD is applied automatically when you print from AutoCAD, and optimal
printing is performed.
Note
User's Guide
D
Easy Settings is selected, click CAD (Color Line Drawing) or CAD (Monochrome
E
Print Target list.
F
Print Quality list.
A
Paper Source list.
M
Print to start printing.
P.136
➔
E
Print Target list by clicking
B
Roll Width. In this case, ISO A2/A3 (420.0mm) is
P.276
➔
P.279
➔
Printing from AutoCAD
G
View set..
47