Table of Contents
Advertisement
TANDBERG MPS User Manual
5.2 PRI Configuration
To configure the PRI settings on the TANDBERG MPS, open 'PRI' as shown in the Figure 5‑3. ��I ���rd
configuration.
Figure 5‑3. PRI board configuration
NOT�
Please ensure that PRI is enabled for the correct ISDN cards in the H320-configuration as described in
�e��i�� 5.1 H.320 Network configuration.
PRI Board Configuration
Send Complete
On
The TANDBERG MPS will send the ISDN message information element "Sending Complete" in the outgoing
call Setup message. This is only required in a few countries.
Off
The TANDBERG MPS will not send "Sending Complete". (Default)
Send Number
On
The TANDBERG MPS will send its own number to the far end. This is only useful when each conference have
specified a dial-in number. (Default)
Off
The TANDBERG MPS will not send its own number to the far end. Please note that the network may still send
your number to the far end.
D13373.04
Advertisement
Table of Contents
