TANDBERG MPS User Manual page 47

TANDBERG MPS User Manual
Network Module
Network ID
Create New
To store the new entry, press the 'Create New' button.
Cancel
Will discard all changes made and return to the 'Phone Book' page.
Add New Group Entry
It is possible to define up to 16 group entries. The Group entries are useful for recurring meetings where the same
participants meet each time. By doing this, only the group entry has to be selected in the 'Add Participants' menu and
the participants are automatically being called.
To add a new group entry in the Phone Book, press the 'Add New Group Entry' button and the 'Add New Group Entry'
will open, as shown in the Figure 3‑13. Add �ew gr�up e��ry.
Figure 3‑13. Add �ew gr�up e��r�
Each group entry can contain up to 32 participants.
Name
Add

D13373.04
Used to specify which Network Interface Card to use for outgoing calls. Optional for ISDN
calls. Mandatory for V.35 calls.
Used to specify which V.35 port to use (mandatory). For IP calls it specifies which IP network
to use (optional).
Enter the name of the group entry.
Select the participant from the Phone Book and press 'Add' and they will be added into the
Participants list in the Group Entry.