Basic view
Provides a basic overview of all the participants in the conference.
Figure 3‑7. B��i� view.
Participants
Shows the name of the participants.
Status
Shows the status of the connection.
Establ Out
Alerting
Connected, 8 kbps
Requesting Password
Initiating Encryption
Disconnected
Clear Out
Net
Shows the network protocol used for the connection.
H
The participant is connected on IP using the H.323 protocol.
H0
The participant is connected on ISDN or V35 using the H.320 protocol.
SIP
The participant is connected on IP using the SIP protocol
ISDN
The participant is connected on ISDN as a telephone.
Audio
Shows the audio status for each participant (not supported for SIP calls).
The participant is transmitting audio.
The participant has muted the microphone.
The participant is connected as a telephone.
Shown during call setup between the participant and the MCU.
Waiting for the participant to answer the outgoing call.
The participant is connected at 384 kbps bandwidth.
To join the conference. the participant is requested to enter the
conference password.
Encryption is being initiated between the MCU and the
participant.
The participant has either disconnected or been disconnected by
the conference administrator.
The MCU is currently disconnecting the participant.
TANDBERG MPS User Manual
February 2006