Status - TANDBERG MPS User Manual

. V. Status
To view the status of the V.35 Board, open 'Serial (V.35) Status as shown in the Figure 4‑4. V.35 ���rd ����u�.
Figure 4‑4. V.35 ���rd ����u�
Clockrate Displays the current clock rate for each individual Serial port. When a port is active in a call this will
display the call rate that the port is connected at. If used for external clocking on the MPS this will
display the rate of the clock that the MPS is receiving from the network.
CD Displays the current status for Carrier Detect for each individual port. When a port is active in a call
this will show "On". When a port is in the idle state this will show "Off".
DTR Displays the current status for Data Terminal Ready for each individual port. When a port is active in
a call or assigned to a conference this will show "On". When a port is in the idle state this will show
"Off".
TANDBERG MPS User Manual
1
February 2006