System Controller Board - TANDBERG MPS User Manual

8.1.1 System Controller Board

The front of the System Controller Board is equipped with the following interfaces:
 1 X LAN / Ethernet (RJ-45) 10/100 Mbps
 1 x COM port
 2 X USB port (these are for future use)
You will also find 2 Light Emitting Diodes (LEDs) for system status. You will have the following LEDs on the front of the
System Controller Board:
 CPU LED - on when CPU activity
 FAIL LED - on when parameter inconsistency in boot code
Press and hold for a few seconds the RST button on the System Controller Board for restarting of the system. You
can also do this via the LCD on the chassis, see Appendix: LCD Display Menu Structure for details.
The LAN interfaces on the System Controller Board is for management/call control signaling.
The 2 LAN interfaces will allow you to connect to two different non-overlapping IP-networks so that participants
with no IP-routing between them can be joined in a conference. At least one Media Processing Board must then be
connected to each network. The 2xLAN interfaces will also give the TANDBERG MPS support for two Gatekeepers
- one on each network.
Figure �‑1. �����em ����r���er ���rd‑ fr���
LCD Display Menu Structure for details.
TANDBERG MPS User Manual
for details.
February 2006
10