Using The Mps - TANDBERG MPS User Manual

 Using the MPS

The TANDBERG MPS is normally controlled via the web interface, but any authorized user may schedule meetings on
the TANDBERG MPS by using the TANDBERG Management Suite (TMS) or the TANDBERG Scheduler.
The TANDBERG MPS can also be controlled via SSH or Telnet by using a comprehensive set of API commands.
This enables the TANDBERG MPS to be controlled by a different user interface, such as an AMX or Crestron control
systems.
For further information please see the document
.
tandberg.net
The TANDBERG MPS consists of the multipoint control unit, MCU, and may also include optional Gateway
functionality. In the following sections 3.1 Using the MCU, 3.2 Using the Gateway and 3.3 Phone Book we will
describe how to use the web-interface of the TANDBERG MPS. Note that the Gateway Configuration tab on the web
interface is only visible when the Gateway option is installed.
NOTE For the web interface of the TANDBERG MPS to work properly, make sure you
have set the permission to 'allow scripting' in the Security Settings in the Web
browser.
TANDBERG MPS API
TANDBERG MPS User Manual
supplied with the system or on
http://www.
1
February 2006