Thermo Scientific HM340E Operation Manual page 40

Segment arc and universal Specimen holder
The segment arc and universal specimen holder are highly suitable for the clamping of small specimens
embedded in plastic.
•
The specimen is inserted in the holder [a] and clamped with the screw [b] with the hex head wrench [c].
•
Then the holder together with the specimen is put into the segment carrier [e], where the holder can be
turned 360°.
•
Thus, the specimen can be aligned as required.
•
Then, the holder is clamped into the selected position with the screw [d].
•
The carrier [e] can be moved on the base [f ]. This way, the surface of the specimen can be placed
parallel to the knife/blade.
•
The screw [g] is used to swing the carrier onto the base.
40
Thermo Scientific Rotary Microtome HM 340E