Turning off the Retraction Function
If desired, the function "Retraction" can be turned off.
•
Press the MENU button [1].
•
Select submenu "Retraction" by turning the knob [A].
•
Press the knob to confirm the selection.
•
Turn the knob [A] to select the desired function: ON or OFF
•
Press the knob [A] to confirm the setting.
The yellow LED RETRACTION might stay on and will go off only after the specimen has been passed through
the cutting movement by turning hand wheel.
•
To turn the „Retraction" mode on again, please proceed as described above.
Note
The selected function is shown on the display as ON or OFF.
Thermo Scientific Rotary Microtome HM 340E
29