Roland EGX-600 Service Notes page 39

3 Replacement of Main Parts
Fix the Spindle Motor Pulley to the Spindle Motor with the
6
Set Screw.
When fixing the Spindle Motor Pulley, it is
necessary to align the top end of the Spindle
Motor Pulley and the top end of the Motor Shaft.
It is necessary to fix the Set Screw against the D-
Cut part of the Motor Shaft.
3
Tighten up the screw with the collar and tighten the other
7
screws temporarily to the Flange and put the Spring.
Attach the Spindle Belt and tighten up the screws of the
8
Flange.
Connect the Spindle Motor Cable and pack it with
9
INSULOCK TIE, and fix the Z Cable Cover.
Please be careful not to pinch the Cable by the Z
Cable Cover.
36
<Side View of the Spinlde Motor Pulley>
Motor Shaft
<Top View of the Spinlde Motor Pulley>
Set Screw
Motor Shaft
Pulley
Spring
Flange
Screw with the collar
Spindle Belt
Screws
Spindle Motor
Cable
Top Part
Spindle
Motor
Pulley
D-cut part
Z Cable Cover