Roland EGX-600 Service Notes page 41

3 Replacement of Main Parts
Loosen the Set Screws and remove the X Motor Pulley from
5
the X Motor. Then, remove the X Motor from the Flange and
change it to the new one.
3
When fixing the Motor Flange, be careful with the
direction of the X Motor and the Flange.
Fix the Flange to the X Motor while taking care
with the cable direction and the bending part of
the Flange as the figure.
It is necessary to press the X Motor Pulley
downward against the X Motor Shaft as the
figure.
Fix the X Motor Pulley to the X Motor with the Set Screw.
6
It is necessary to fix the Set Screw against the D-
Cut part of the X Motor Shaft.
38
X Motor
X Motor
Pulley
Set Screws
<Bottom View>
X Motor Cable
X Motor
X Motor Shaft
<Top View>
Set Screws
X Motor
Pulley
Flange
Cable Direction
Bending
Part
Flange
X Motor Pulley
D-Cut part
X Motor Shaft