Roland EGX-600 Service Notes page 59

3 Replacement of Main Parts
When fixing the Y LM Guide, be careful with the
position of the Screws as the figure.
3
Fix the Carriage Rail to the LM Block and tighten up the Set
6
Screws and Screws.
Push the Carriage Rail to the back side of the Machine and
7
tighten up the screws of the front side.
Move the Carriage Rail to the front side of the machine and
8
tighten the screws of the rear side.
56
<Front Side>
Set
Screws
Y LM
Guide
Y LM Guide
Y LM Guide
<Rear Side>
LM Block
Carriage Rail
Carriage Rail