Roland EGX-600 Service Notes page 52

Select the [AXIS Z] in the [LOAD] menu and press [ENTER]
16
key. Then, Carriage moves to the Limit Position.
Enter the value 350 and press the [ENTER] key.
After setting the value, the load check starts.
17
The Carriage moves in the Z direction to check the load.
If the check is OK, fix the Cover.
If the check is NG, repeat 8 to 10 and 14 to 15 .
3 Replacement of Main Parts
AXIS X Y Z S
[ENTER] key
AXIS X Y Z S
VALUE 350
[ENTER] key
AXIS X Y Z S
VALUE 350 OK
3
49