Accessories
Follow the steps in "Unpacking and Repacking" on the packing carton to take out the
included items and accessories. Before you attempt installation, make sure all the included
items are present.
Operation panel : 1
Depth regulator
nose unit : 1
(17 mm : 1, 10 mm : 1)
Roland Software Package
CD-ROM : 1
*1 This is for diameter 4.36 mm character cutters and flat cutters. It cannot be used with diamond
scrapers or end mills.
*2 The bolts and nuts are installed on the machine. (They are used for attaching the packing
retainers.)
Remove the
1. Use the included wrench (10mm) and hexagonal wrench (3mm) to remove the
retainers.
retainers on the side of the unit. Then, lower the unit from the base.
Wrenches
Hexagonal screw driver (2
Operation-panel
connector cable : 1
Solid collet : 1 (*1)
mm) : 1
User's Manual : 1
7 Service Activities
Power cord : 1
Clamps : 4 (*2)
Hexagonal wrench
(3 mm) : 1
95
7