Table of Contents
Advertisement
3 Replacement of Main Parts
Remove the 4 screws fixing the Carriage Unit.
5
And loosen the 2 Set Screws on the Boss Part of the Z
Screw.
Then, Loosen the 2 Screws on the Z Screw Support.
3
Detach the Carriage Unit from the Carriage Base.
6
Remove the Z Motor and change it to the new one. Then
7
tighten up the screws for fixing the Z Motor.
When fixing the Z Motor, be careful with the
direction.
Fix the Z Motor Shaft to the Boss part of the Z
Screw while taking care with the cable direction
as the figure.
46
Screws
Carriage Unit
Screws
<Bottom View>
Z Motor Cable
Cable Direction
Boss Part of the
Z Screw
Z Motor
<View Point>
Screws
Advertisement
Table of Contents
