Advertisement
3 Receiving
3
Receiving
Please perform the following tasks after receiving the CANopen Option:
• Inspect the CANopen Option for damage.
If the CANopen Option appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the PCB (see
• If you have received the wrong model or the CANopen Option does not function properly, contact your supplier.
◆
Contents and Packaging
Description:
_
Quantity:
◆
Tool Requirements
A Phillips screwdriver (for screw size
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
Note: Tools required to prepare CANopen cables for wiring are not listed in this manual.
8
Table 2 Contents of Package
Option Unit
1
#1 or #2, U.S. standard size) is required to install the CANopen Option.
<1>
Figure
1).
Ground Cables
4
YASKAWA ELECTRIC SIEP C730600 24A V1000 Option CANopen Technical Manual
Warning Labels
Installation Manual
1
MANUAL
1
Advertisement
