Victron energy Venus GX Manual page 96

VRM: Remote firmware update
1. Introduction
This manual describes how to remotely update firmware. This functionality requires the device to be
updated connected to a GX device (CCGX, Venus GX, or other).
Features:
1. Remotely update internet-connected products straight from the VRM Portal
2. No need to install any software
3. Works from laptop, tablet & phone
4. No need to find the right firmware file: the system has all, and will clearly indicate that a newer
version is available.
5. Works with VE.Direct products: MPPT Solar Chargers, BMV Battery Monitor, Phoenix Inverters,
and more.
6. Works with VE.Can products: MPPT VE.Can Solar Chargers, Skylla-i, and more.
Video
2. Details
2.1 Requirements
Venus OS v2.17 or later
System must be connected to the internet and communicating to the VRM Portal.
The Two way communication setting, which is on the GX device menu → Settings → Services,
must be enabled.
2.2 Compatible products
Products ranges for which the firmware can be updated remotely:
Products connected via VE.Direct communication port:
VRM: Remote firmware update