Victron energy Venus GX Manual page 68

Functionalities:
Monitor shore power and generator status.
Monitor battery status for one or more batteries. By using the voltage of for example battery
chargers, it can also visualise secondary batteries such as Generator starter batteries.
Monitor the power conversion equipment: chargers, inverters, inverter/chargers.
Monitor solar production from an MPPT Solar Charger.
Monitor AC loads, and DC loads.
Control shore power input current limit.
Control the inverter/charger: switch it off, on, or set it to charger-only.
Optionally open the Victron Remote Console panel; allowing access to further parameters.
Victron equipment compatibility:
All Victron inverter/chargers: From a 500VA single phase device up to a large 180kVA three
phase-system, including Multis, Quattros, 230VAC and 120VAC models.
Battery Monitors: BMV-700, BMV-702, BMV-712 and newer, Lynx Shunt VE.Can, Lynx Ion BMS.
All Victron MPPT Solar Charge Controllers
Required components:
Battery system.
Victron inverter/charger.
Victron Battery monitor.
Network cable connection between MFD and a GX device such as a Color Control GX, Venus GX
or an Octo GX.
UTP network cable.
Color Control GX manual