Victron energy Venus GX Manual page 4

5. Open VictronConnect, it will start scanning the WiFi network automatically.
6. Once found, select the GX device from the list.
7. Open the Remote Console
Notes:
If you cannot use VictronConnect, you can use a web browser and navigate to the IP address
172.24.24.1
For added security it is possible to disable the WiFi Access Point. See Settings → Wi-Fi → Create
access point. See below chapter explaining the Push button for how to restore access in case
ever necessary.
Instruction video
Step by step instruction video on how to connect to a GX device using the VictronConnect App.
Video
Detailed instruction video
This second video was made before VictronConnect got the feature to find a device on a network. All
the explanations in the video regarding IP Addressing can be ignored, and use VictronConnect as in
above video instead.
Video