Table of Contents
Advertisement
4.
Ready to start up.
Setting up the Victron Multi or Quattro
1.
After connecting the MultiPlus or Quattro with the battery, you can now connect a computer
through the VE.Bus (in combination with the Victron interface MK2USB) to configure the system
with the latest version of the software VE.Configure.
2.
Go to the tab Assistants:
3. Add one of the Assistants that regulate output frequency:
1. ESS Assistant
2. PV Inverter support
4. Note that it is not necessary to change the default settings in the Assistant.
5.
Complete the rest of the Assistant and write the new settings to the MultiPlus or Quattro.
Table for settings for 50Hz and 60Hz frequency
State
50Hz 60Hz .
Start
51.0
60.2
Hz
AC-coupled PV with Fronius PV Inverters
Advertisement
Table of Contents
Troubleshooting
