Job Box Setting - Kyocera ECOSYS PA6000 Series Operation Manual

Printing from PC > Job Box Setting

Job Box Setting

Configures settings for Job Box.
1
Display the screen.
[Document Box] key > [ ] [ ] key > [Job Box Setting] > [OK] key
NOTE
If the default screen of the box is set to a Custom Box, display the Job Box screen.
[Document Box] key > [Back] key > [ ] [] key > [Job Box] > [OK] key
2
Configure the settings.
The available settings are shown below.
Item
Quick Copy Jobs
JobRet. Deletion
DelPIN at PwrOff
Storage Media
To maintain free space on the box, you can set the maximum number of stored jobs.
Value: number between 0 and 300
NOTE
When 0 is set, Quick Copy cannot be used.
This setting specifies that documents, such as Private Printing, Quick Copying, or Proof
and Hold Printing, saved temporarily in the job box are automatically deleted after they
have been saved for a set time.
Value: Off, 1 hour, 4 hours, 1 day, 1 week
NOTE
This function is valid for documents saved after the function is set. Regardless of this
function setting, temporary documents are deleted when the main power switch is
turned off.
Configures whether to delete the jobs retained in the PIN Print box when the power is
turned off.
Value: Off, On
Select which storage media to use.
Value: SSD, SD Card
NOTE
This setting is not displayed if the optional SSD or SD card is not installed.
4-31
Description