Setup and Registration (System Menu) > Operation Method
Item
RAW Port
Off/On
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
LPD
Off/On
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
IPP
Off/On
Port Number
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
-
Select whether to receive documents using RAW Port.
Value: Off, On
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
-
Select whether to receive documents using LPD.
Value: Off, On
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
-
Selects whether to receive documents using IPP. To use the IPP protocol, select [Not
Secure (IPP&IPPS)] on IPP Security under Security Settings from the Command Center
*1
RX.
Value: Off, On
Specifies the port number used. The default port number is 631.
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
8-22
Description
*1
*1
*1