Kyocera ECOSYS PA6000 Series Operation Manual page 191

Setup and Registration (System Menu) > Operation Method
Buzzer
[Menu] key > [ ] [ ] key > [Device Common] > [OK] key > [ ] [ ] key > [Buzzer] > [OK] key
Set options for buzzer sound during the machine operations.
Item
Key Confirmation
Job Finish
Ready
Error
Keyboard Confirm
RAM Disk Setting
[Menu] key > [ ] [ ] key > [Device Common] > [OK] key > [ ] [ ] key > [RAM Disk Setting] > [OK] key
NOTE
This function will not be displayed when the optional SSD is installed.
Item
RAM Disk Setting
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Format SSD
[Menu] key > [ ] [ ] key > [Device Common] > [OK] key > [ ] [ ] key > [Format SSD] > [OK] key
Format an optional SSD.
When an optional SSD is inserted into the printer for the first time, it must be formatted before use.
IMPORTANT
Formatting will destroy any existing data on a storage device including a used SSD.
Emit a sound when a key is selected on the operation panel.
Value: Off, On
Emit a sound when a print job is normally completed.
Value: Off, On
Emit a sound when the warm-up is completed.
Value: Off, On
Emit a sound when errors occur.
Value: Off, On
Emit a sound when a key on the optional USB keyboard is selected.
Value: Off, On
A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Mode: Off, On
RAM Disk Size: The setting range varies depending on the amount of memory
installed and the option memory usage setting.
8-32
Description
Description