Entering Symbols; Entering Characters - Kyocera ECOSYS PA6000 Series Operation Manual

Appendix > Character Entry Method
Keys Characters (Each press of a key changes the character in the order from left to right.)
. ,
0 (During number entry)
Select to change the character in the cursor position between upper case and lower case.
"*" or "." (During number entry)

Entering Symbols

Symbols can be entered.
1 Select the [#] key. Displays the symbol list.
2 Select the [ ], [ ], [ ] or [ ] key to move the cursor and select the symbol to be entered.
3 Select the [OK] key. The selected symbol is entered.

Entering Characters

Follow the steps shown below to enter "R&D" for example.
1 Select the [7] key three times. [r] is entered.
2 Select the [*/.] key. [r] changes to [R].
- _ ' ! ? (space) 0 (Repeats from the first character on the left)
11-12