Kyocera ECOSYS PA6000 Series Operation Manual page 185

Setup and Registration (System Menu) > Operation Method
Item
EnhncdVNC ov TLS
Off/On
Port Number
Available Net.
*2
Wi-Fi Direct
*2
Wi-Fi
Wired Network
*1 The setting will be changed after restarting the device or network.
*2 This function is displayed when the optional Wireless Network Interface Kit is installed.
*3 Set "TLS" to [On] in TLS Setting.
TLS Setting (page 8-39)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Primary Network
[Menu] key > [ ] [ ] key > [Network] > [OK] key > [ ] [ ] key > [Primary Network] > [OK] key
NOTE
This function is displayed when the optional Network Interface Kit (IB-50) or Wireless Network Interface Kit (IB-
37/IB-38/IB-51) is installed.
Item
Primary Network
-
Start Command Center RX and set for using TLS-protected remote operation.
Value: Off, On
NOTE
• The factory default setting is [On].
• If the setting is [On], a TLS certificate is required. The factory certificate is the
certificate owned by the machine.
Command Center RX User Guide
Specifies the port number used. The default port number is 9061.
Value: 1 to 32767
NOTE
This function is displayed when [Off/On] is set to [On].
-
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Off/On] is set to [On].
Specify the network to be used for the send function, the network authentication and
connecting to external address book.
Value: Wi-Fi, Wired Network, Optional Network
8-26
Description
Description
*1, *3
*1