Changing The Position Of The Osd - G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual

Changing the position of the OSD

By default, the OSD is shown at the centre of the console monitor. You can adjust
the position to your liking.
How to change the position of the OSD:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Select the row
5. Use the arrow keys
press to reset the default position.
Ctrl+D
6. Press F2 to save your settings or
(default) to open the OSD.
Console setup and press
Personal Profile and press
Set menu position and press
or the mouse to move the OSD to the desired position or
Esc to cancel the process.
Enter .
Enter .
Enter .
G&D VisionXS-IP-F-DP-UHR · 94
Configuration