Configuring The Network Interface; Configuring The Global Network Settings - G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual

Establishing a KVM-over-IP™ connection for the first time

Configuring the network interface

How to configure the network interface:
1. Use the remote hotkey
2. Select the entry
3. Select the entry
4. Enter the following data under
Operational
mode:
IP address:
Netmask:
5. Press F2 to save your settings.

Configuring the global network settings

Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the remote hotkey
2. Select the entry
3. Select the entry
29 · G&D VisionXS-IP-F-DP-UHR
Ctrl + Num to open the OSD.
and press
Network setup
Interfaces and press
Interface A
Press to select the operational mode of the interface:
F8
A static IP address is assigned.
 Static:
 DHCP: IP address is obtained from a DHCP server.
 Off: switches off network interface.
Enter the IP address of the interface.
The operational mode DHCP does not allow making entries.
Enter the netmask of the network.
The operational mode DHCP does not allow making entries.
Ctrl + Num to open the OSD of computer module.
and press
Network setup
Interfaces and press
.
Enter
Enter .
:
.
Enter
Enter .