Disconnecting A Remote Target - G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual

IP-MUX functionality
How to access a remote target via select keys:
1. Press the Target Select-Key modifier(s) that have been adjusted and the select key
assigned to the remote target (see Add, configuration and deletion of a remote target on
page 33 ff.).
EXAMPLE:
 Target Select-Key modifiers:
 Target Select key for Remote Target :
Press Alt Gr+Shift
switching to the remote target takes place.

Disconnecting a remote target

How to disconnect a remote target:
1. Start the local OSD with the
2. Press the
Ctrl+D
remote target.
41 · G&D VisionXS-IP-F-DP-UHR
Alt Gr+Shift
and then the select key
Alt+Num
key combination to disconnect the active connection to the
S
S . As soon the keys are released, the
hotkey (default).