Extended Settings Of Kvm-Over-Ip Connection; Limiting The Bandwidth - G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual

Establishing a KVM-over-IP™ connection for the first time

Extended settings of KVM-over-IP connection

Limiting the bandwidth

By default, the KVM extender uses the maximum available bandwidth of a Gigabit
Ethernet. By means of manual bandwidth management you can adapt the transmis-
sion to different bandwidth requirements.
How to set a limit for the bandwidth of a KVM-over-IP connection:
1. Use the remote hotkey Ctrl+ Num to open the OSD of the computer module.
2. Select the row and press .
KVM connection Enter
3. Under Bandwidth limit (Mb/s) you can set the bandwidth limit of a KVM-over-IP
connection in Mb/s.
NOTE:
Entering the value 0 deactivates the limit.
4. Press F2 to save your settings.
35 · G&D VisionXS-IP-F-DP-UHR