Changing The Osd Key - G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual

Configuration

Changing the OSD key

The hotkey to open the OSD consists of at least one hotkey modifier (see Changing
hotkeys on page 74) and an additional OSD key. You can freely select these keys
from a number of selectable keys.
You can change both the hotkey modifier and the OSD key.
How to change the current OSD key:
1. Open the remote OSD of the computer module by pressing the
(default: Ctrl+Num
Open the local OSD of the console module by pressing the
(default:
Alt+Num
2. Select the row
3. Select the row
4. Under
(OSD action)key
OSD when pressing the OSD key together with the hotkey modifier(s):
Num  Num key (default)
Pause  Pause key
 Insert key
Insert
 Delete key
Delete
 Home key
Home
 End key
End
 Page Up key
PgUp
PgDn  Pace Down key
Space  Space key
5. Press to save your settings.
F2
75 · G&D VisionXS-IP-F-DP-UHR
), if you want to change the hotkey for the remote OSD.
), if you want to change the hotkey for the local OSD.
System setup and press
and press
Hotkey Enter
, press to select an OSD key. Now you can open the
F8
Enter (remote OSD) or
.
remote hotkey
local hotkey
F11 (local OSD).