G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual page 123

Ensure proper installation position for devices with vents
For reasons of electrical safety, only upright, horizontal installation is permitted for
devices with ventilation openings. Vertical installation is only permitted with suitable
equipment carriers from G&D.
Do not insert any objects through the device's openings
Objects should never be inserted through the device's openings. Dangerous voltage
could be present. Conductive foreign bodies can cause a short circuit, which can
lead to fires, electric shocks or damage to your devices.
Avoid tripping hazards
Avoid tripping hazards while laying cables.
Use earthed voltage source
Only operate this device with an earthed voltage source.
Use exclusively the G&D power pack
Only operate this device with the power packs included in delivery or listed in this
operating manual.
Do not make any mechanical or electrical alternations to the device
Do not make any mechanical or electrical alternations to this device. Guntermann &
Drunck GmbH is not responsible for compliance with regulations in the case of a
modified device.
Do not remove device cover
The cover may only be removed by a G&D service technician. Unauthorised
removal voids the guarantee. Failure to observe this precautionary measure can
result in injuries and damage to the device.
Operate the device exclusively in the intended field of application
The devices are designed for indoor use. Avoid extreme cold, heat or humidity.
Safety instructions
G&D VisionXS-IP-F-DP-UHR · 2