Administrating User Groups; Creating A New User Group - G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual

Users and groups

Administrating user groups

User groups enable the user to create a common rights profile for several users with
the same rights and to add user accounts as members of this group.
This way, the rights of these user accounts do not have to be individually config-
ured, which facilitates the rights administration within the KVM system.
NOTE:
The administrator and any user with the Superuser right are authorised to
create and delete user groups as well as edit the rights and the member list.

Creating a new user group

The user can create up to 256 user groups within the system.
How to create a new user group:
1. Press the +
Ctrl Num
2. Select the User group setup
3. Press F3 and enter the following data:
Name:
4. Press F2 to save your inputs and create an user account.
IMPORTANT: The recently created user group can neither configure nor access the
target modules (see Efficient user group administration on page 55).
61 · G&D VisionXS-IP-F-DP-UHR
(default) hotkey to open the OSD.
entry and press
Enter the name of the user group.
Enter .