Ip-Mux Functionality; Accessing A Remote Target Via Osd - G&D VisionXS-IP-F-DP-UHR Installation And Operation Manual

IP-MUX functionality

IP-MUX functionality
The modules of the
ity to access different computer modules (one after the other).
IMPORTANT: A console module can only be connected to one computer module at
a time!
To use this function, you can connect a maximum of 20 computers to separate com-
puter modules and configure these computer modules as remote targets (see
page 33 ff.) in the console module.
The configured remote targets can be connected via the local OSD of the console mod-
ule.

Accessing a remote target via OSD

How to access a remote target via OSD:
1. Start the local OSD with the
2. Use the arrow keys
3. Press Enter .
39 · G&D VisionXS-IP-F-DP-UHR
VisionXS-IP series offer with the
Alt+Num
Select
Sort. Alph+
Search .......................
Remote target #1
Remote target #2
Remote target #3
ESC
to select the remote target to be accessed.
IP-MUX functionality the possibil-
hotkey (default).
IPCON
F11:Config