Mechanical Part; Electrical Part; Usage Notice; Precautions - General Measure Checkweigher User Manual

1.1.1 Mechanical part

1． The servo driver is used as the motor driving device to ensure the stability and
adjustability of the speed in the process of weight checking.
2. Double photoelectric mode more accurately determine the object up and down the
weighing platform, improve the accuracy and efficiency of weight detection.
3. Scale height adjustment range is larger, convenient for customers to choose to use.
4. Mechanical modular design makes transportation and maintenance more convenient
and application adaptability stronger.

1.1.2 Electrical part

1. Simple wiring, external only need to access the power cord; The internal use of
different specifications pin plug terminal block, wiring is convenient and will not make
mistakes.
2. Touch screen operation interface optimization, product parameter setting is simple
and the main interface content is richer.
3. The three-color indicator shows qualified (green), out-of-tolerance (red), under
tolerance (yellow), and the working state of the inspection weight is clear at a glance.
Buzzer user can define the alarm mode.
4. The new algorithm is adopted in the process of weight inspection, and the high
precision can be guaranteed in the process of high-speed weighing.
5. Optimize user login and logout function, without tedious operation and effectively
prevent others from disoperation.
1.2

Usage Notice

1.2.1 Precautions

1. Do not perform mechanical or electrical maintenance while live, do not place tools on
the scale, and do not perform welding operations on the scale.
2. The installation site must ensure the ground level, after installation through the
foundation adjustment, ensure that the weighing table level, tilt does not exceed 0.5
degrees, away from the vibration source.
3. Make sure the equipment is safely grounded and there is no strong electricity or
magnetic field interference nearby.
4. Do a good job of fire prevention, avoid direct sunlight to check the weighing table and
relatively strong air flow (outdoor air, fan and air conditioning outlet is directly against
the weighing table).
5.Should avoid squeezing, stepping on the scale platform, handling should first fixed
scale, installed sensor limit to prevent damage to the sensor, prohibit the direct handling
of the scale platform to move.
2
CW-100G (C01+MCGS)